Accessing The User Tools (System Settings) - Ricoh Aficio 1015 Operating Instructions Manual

Accessing the User Tools (System Settings)

This section is for the key operators in
charge of this machine. You can change
or set the machine's default settings.
Preparation
After using the user tools, be sure
to return to Copy mode.
The settings are not canceled even
if the operation switch is turned off
or the {Clear Modes} key is pressed.
Reference
For information on Copy, Fax, and
Printer User Tools, see the appro-
priate reference manual.
A
Press the { { { { User Tools/Counter} } } } key.
The User Tools Main Menu ap-
pears.
B
Press the 0 0 0 0 or 1 1 1 1 key until "2.Sys-
tem Settings" is displayed, then
press the { { { { OK} } } } key.
Note
❒ To view the total number of
prints made by the machine. See
P.14 "Printing the Counter Val-
ue".
❒ To switch the display language,
select "6. Language"and then
press the {OK} key.
Accessing the User Tools (System Settings)
C
Press the 0 0 0 0 or 1 1 1 1 key until your
desired menu is displayed, and
then press the { { { { OK} } } } Key.
2
13