Frymaster Y/KSCF/C/HC18G User Manual page 36

Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS
5.3 Filter Operations (cont.)
4. Use the L-shaped brush to scrub the frypot, and to
assist in sediment removal. Brush the frypot sides
and between the tubes to remove debris. Use the
clean-out rod to clear the drain if necessary.
5. Open the oil return valve by pushing one of the oil
return valves to the left. Oil-return handles on the far
sides of the cabinet return oil to the frypot through
rear ports, which flush debris from the bottom of the
frypot. The two return valve handles in the center of
the cabinet return oil through the top- mounted faucet.
Ensure the faucet is over the drained frypot before
attempting to return oil through the faucet.
The levers on the right and left of the cabinet return oil through rear ports in the
frypot. The center-mounted levers return oil through a top-mounted faucet. In all
cases, a yellow lever returns oil to the frypot directly above it.
Always ensure that the over-the-top oil return faucet is located over the frypot or an
appropriate container before activating the over-the-top oil return system. If not, the
CHAPTER 5: FILTRATION
DANGER
hot oil will spill and may cause burns.
5-7
Use the L-shaped brush to loosen
debris as oil drains from the frypot.