Table of Contents
Advertisement
Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS
7.2 Fryer Troubleshooting (cont.)
DRAIN OPEN message
7.2.4
remains after closing drain
valve.
Pump motor won't start or
7.2.5
stops during filtering.
CHAPTER 7: TROUBLESHOOTING
1. KFC-1 SMS controller was turned OFF
while draining frypot.
2. Close drain valve. Turn KFC-1 SMS
controller
Controller display will read ON.
3. Open drain valve.
controller display will read DRAIN
OPEN. After 30 seconds the controller
display will read FILL.
4. Close drain valve.
5. Fill frypot with shortening. Press
EXIT/COOL FILTER when ready to
cook.
6. If the KFC-1 SMS controller message
DRAIN OPEN remains after Steps 1-
4, contact an authorized service agent.
Possible malfunctions are:
a.
b.
c.
The motor thermal overload has tripped. If
1.
the
approximately 45 minutes. Press the
button on the end of the filter motor.
2. If you have to do this repeatedly, stop
resetting the overload and contact an
authorized service agent.
NOTE: This is usually caused by allowing
large particles of food to enter the pump
during filtering. Ensure that the filter paper
and crumb screen are properly in place.
7-5
OFF
and
The KFC-1 SMS
Drain microswitch may be faulty.
Drain circuit is suspect.
KFC-1 SMS controller is suspect.
thermal
overload
ON
again.
trips,
wait
Advertisement
Table of Contents
