Checking - Fuji Xerox DocuPrint CM205 f User Manual

Checking Page Counts
The total number of printed pages can be checked at the operator panel. Four meters are available:
Meter 1 (color prints), Meter 2 (monochrome prints), Meter 3 (large size color prints), and Meter
4 (Meter 1 + Meter 2).
The Meter Readings counts the number of pages printed properly. Single side print (including
Multiple Up) is counted as one page, and 2-sided print (including Multiple Up) is counted as two.
During 2-sided printing, if an error occurs after one side is printed properly, it is counted as one page.
When printing color data, which has been converted by using ICC profile on an application, with the
Color setting, the data is printed by color even if it seems to be black and white data on the monitor. In
that case, Meter 1 and Meter 4 are increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page. However, when doing 2-sided
printing for odd number of pages, the blank page inserted to the rear side of the last odd page is not
counted.
See also:
• "Meter Readings" on page 322
Use the following procedure to check a meter:
1
Press the (System) button.
2
Select Meter Readings, and then press the
3
Check the values for each meter.
459 Maintenance
button.