Fuji Xerox DocuPrint CM205 f User Manual page 75

Network Connection (DocuPrint CM205 f/CM205 fw Only)
To connect the printer to a network:
1
Ensure that the printer, computer, and any other connected devices have been turned off and all
cables have been disconnected.
2
Connect one end of an Ethernet cable into the Ethernet port at the rear of the printer, and the
other end to a LAN drop or hub.
Ethernet port
NOTE:
• Connect the Ethernet cable, only if you need to setup a wired connection.
See also:
• "Configuring Wireless Settings (DocuPrint CM205 fw Only)" on page 90
Printer Connection and Software Installation 74