Print Quality Problems - Fuji Xerox DocuPrint CM205 f User Manual

Print Quality Problems

This section includes:
• "The Output Is Too Light" on page 389
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 390
• "Random Spots/Blurred Images" on page 391
• "The Entire Output Is Blank" on page 392
• "Streaks Appear on the Output" on page 393
• "Pitched Color Dots" on page 394
• "Vertical Blanks" on page 395
• "Mottle" on page 396
• "Ghosting" on page 397
• "Fog" on page 398
• "Bead-Carry-Out (BCO)" on page 399
• "Auger Mark" on page 400
• "Wrinkled/Stained Paper" on page 401
• "The Top Margin Is Incorrect" on page 402
• "Color Registration Is out of Alignment" on page 403
• "Protrudent/Bumpy Paper" on page 404
NOTE:
• In this section, some procedures use the Printer Setting Utility or SimpleMonitor. Some procedures that use
the Printer Setting Utility can also be performed using the operator panel.
See also:
• "Understanding the Printer Menus" on page 320
• "Printer Setting Utility (Windows Only)" on page 61
• "SimpleMonitor (Windows Only)" on page 62
Troubleshooting 388