Mottle - Fuji Xerox DocuPrint CM205 f User Manual

 Mottle
Problem
The printed result has mottled
appearance.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Action
Adjust the transfer bias.
1 Launch the Printer Setting Utility, click Adjust BTR on the Printer
Maintenance tab.
2 Adjust the setting for the type of print media being used.
3 Click the Apply New Settings button.
If you use non-recommended print media, use the print media
recommended for the printer.
Troubleshooting 396