Table of Contents
Advertisement
The Operator Panel
1
Turn on the printer.
Ensure that Select Function message appears on the LCD panel.
2
On the operator panel, press the
3
Select Admin Menu, and then press the
4
Select Network, and then press the
5
Select TCP/IP, and then press the
6
Select IPv4, and then press the
7
Select Get IP Address, and then press the
8
Ensure that Panel is selected, and then press the
9
Ensure that Get IP Address is selected.
10
Select IP Address, and then press the
The cursor is located at the first three digits of the IP address.
11
Enter the value of the IP address using the numeric keypad.
12
Press the
button.
The next three digits are highlighted.
13
Repeat steps
11
14
Press the
(Back) button, and then ensure that IP Address is selected.
15
Select Subnet Mask, and then press the
The cursor is located at the first three digits of the subnet mask.
16
Enter the value of the subnet mask using the numeric keypad.
17
Press the
button.
The next three digits are highlighted.
18
Repeat steps
16
19
Press the
(Back) button, and then ensure that Subnet Mask is selected.
20
Select Gateway Address, and then press the
The cursor is located at the first three digits of the gateway address.
21
Enter the value of the gateway address using the numeric keypad.
22
Press the
button.
The next three digits are highlighted.
23
Repeat steps
21
(System) button.
button.
to
12
to enter all of the digits in the IP address, and then press the
to
17
to set subnet mask, and then press the
to
22
to set gateway address, and then press the
button.
button.
button.
button.
(Back) button.
button.
button.
button.
Printer Connection and Software Installation
button.
button.
button.
80
Advertisement
Table of Contents
