Printing A Document - Xerox ColorQube 9203 Quick User Manual

Printing a Document

1. Ensure that the correct Xerox ColorQube™ driver has been installed on
your PC. To install the print drivers refer to the System Administrator
Guide.
You can also access the Print Drivers by referring to the Print and Fax
Services CD.
2. Open the document to be printed. Click File > Print and select the Xerox
ColorQube™ device from the list of printers displayed.
3. To change the default printing properties click Properties.
The print driver has various tabs that
contain options and properties.
• Use the Paper/Output tab to
choose the type of media, size
and color and output choices
such as 2 sided prints.
• The Special Pages tab allows
you to add covers, inserts and
exceptions.
• The Color Options tab enables
you to select the output color
variation.
• The Layout/Watermark tab has various options to add watermarks
to pages, change image orientation (landscape or portrait) and
enable booklet and multi-up printing.
• The Advanced tab contains various font, document and printing
options.
Choose the options required for your printing job and click OK to print the
document.
4. The print job will be sent to the device and will appear in the Active Jobs
list. To view the list at the device, press the Job Status button on the
control panel.
If your job is held in the list it requires additional resources or a passcode
to print. To identify the resources required, select the job and select Job
Details. Once the resources are available the job will print. If a passcode
is required, select Release and enter the secure passcode.
For further information about printing, refer to the User Guide.
Printing a Document
ColorQube™ 9201/9202/9203
Quick Use Guide
15