Sending A Fax - Xerox ColorQube 9203 Quick User Manual

Sending a Fax

1. Load your documents face up in the Document Feeder Input Tray. Adjust
the top and bottom guides to touch the documents.
Or...........
Lift up the Document Feeder. Place the document face down onto the
Document Glass and register it to the arrow at the top right rear corner.
Close the Document Feeder.
2. Press the Clear All (AC) button
once to cancel any previous
screen programing selections.
3. Press the Services Home
button and select the Fax
option. The Fax features are
displayed.
4. Enter the recipient's fax number by:
• Keypad Dial - select the Enter Number area on the touch screen and
enter the number using the numeric keypad.
• Manual Dial - if a telephone handset is attached to the device, select
the Manual Dial key and dial the number using the handset or the
numeric keypad.
• Speed Dial - select the Enter Number area and enter the 3 digit
speed dial number, then select the Speed Dial option.
• Address Book - select the Address Book button to access the fax
address book. Select an entry from the Address Book to add to the
Recipients list. Continue adding recipients as required and select
Close to return to the previous screen.
5. If required, select Add to add the number entered to the Recipients list.
Enter additional numbers as required.
The fax will be sent to all the numbers in the Recipients list.
ColorQube™ 9201/9202/9203
Quick Use Guide
Sending a Fax
17