Fuji Xerox DocuPrint P255 dw User Manual page 82

For Windows Vista:
Display Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select the network, and then click Connect.
e
Click Close in the dialog box after confirming the connection is a success.
f
For Windows Server 2008:
Display Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select the network, and then click Connect.
e
Click Close in the dialog box after confirming the connection is a success.
f
For Windows Server 2008 R2 and Windows 7:
Display Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select the network, and then click Connect.
e
• For Fixed IP Networks:
1
Set up your computer for wireless connectivity:
NOTE:
• If the operating system on your computer provides a wireless configuration software, use it to change the
wireless network settings. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select the Wireless Networks tab.
c
Ensure that the check box for Use Windows to configure my wireless network settings is
d
selected.
NOTE:
• Be sure to write down the current wireless computer settings in step
them later.
Click the Advanced button.
e
Select Computer-to-computer (ad hoc) networks only and close the Advanced dialog
f
box.
Click the Add button to display Wireless network properties.
g
82 Printer Connection and Software Installation
f and step h so that you can restore