Print Quality Problems - Fuji Xerox DocuPrint P255 dw User Manual

Print Quality Problems

This section includes:
• "The Output Is Too Light" on page 208
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 209
• "Random Spots/Blurred Images" on page 210
• "The Entire Output Is Blank" on page 210
• "Streaks Appear on the Output" on page 211
• "Mottle" on page 211
• "Ghosting" on page 212
• "Fog" on page 213
• "Bead-Carry-Out (BCO)" on page 213
• "Auger Mark" on page 214
• "Wrinkled/Stained Paper" on page 215
• "The Top Margin Is Incorrect" on page 216
• "Protrudent/Bumpy Paper" on page 216
NOTE:
• In this section, some procedures use the Printer Setting Utility or the SimpleMonitor. Some procedures that
use the Printer Setting Utility can also be performed using the operator panel.
See also:
• "Understanding the Operator Panel Menus" on page 162
• "Printer Setting Utility (Windows Only)" on page 42
• "SimpleMonitor (Windows Only)" on page 43
Troubleshooting 207