Random Spots/Blurred Images; The Entire Output Is Blank - Fuji Xerox DocuPrint P255 dw User Manual

Random Spots/Blurred Images

Problem
The printed result has random
spots or is blurred.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

The Entire Output Is Blank

If this trouble happens, contact our local representative office or authorized dealer.
210 Troubleshooting
Action
Ensure that the toner cartridge is installed correctly.
See also:
• "Installing a Toner Cartridge" on page 232
If you use a non-genuine brand toner cartridge, install a genuine
brand toner cartridge.
Clean up the fusing unit.
1 Load one sheet of paper in the paper tray, and then print a solid
image all over paper.
2 Load the printed sheet with the print surface facing down, and then
print a blank sheet of paper.