Do not incline the product at more than 1 degree angle. Otherwise, it may fall over and cause
injuries.
Left
Front
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji Xerox supplies.
Otherwise, it may cause some defects.
Others
To keep this product in a good performance and condition, always use it in the following
environment:
•
Temperature: 10 – 32 °C
•
Humidity: 10 – 85%
When the product is left in a chilly room and the room is rapidly warmed up by heater, dew
condensation may form inside the product and cause a partial deletion on printing.
Right
Left
1°
1°
Rear
Front
1°
1°
Right
Rear
Safety Notes
17