Random Spots/Blurred Images; The Entire Output Is Blank - Fuji Xerox DocuPrint P255 d User Manual

 Random Spots/Blurred Images
Problem
The printed result has random
spots or is blurred.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
 The Entire Output Is Blank
If this trouble happens, contact our local representative office or authorized dealer.
210 Troubleshooting
Action
Ensure that the toner cartridge is installed correctly.
See also:
• "Installing a Toner Cartridge" on page 232
If you use a non-genuine brand toner cartridge, install a genuine
brand toner cartridge.
Clean up the fusing unit.
1 Load one sheet of paper in the paper tray, and then print a solid
image all over paper.
2 Load the printed sheet with the print surface facing down, and then
print a blank sheet of paper.