Important Safety Instructions - Polaroid Polaview SuperPortable 10 User Manual

Important safety instructions

Cleaning
Water and spillage
Ventilation
Power cord
Overloading power
Unplug the product from the wall outlet before cleaning any
exterior surface. Follow the cleaning instructions in this
manual. See Chapter 4, Maintenance.
Do not use the projector near water. Avoid using the projec-
tor in an area where liquids can spill or where objects can
fall onto it and come into contact with dangerous voltage
points, possibly resulting in fire or electric shock.
The projector housing has vents to ensure reliable operation
and prevention of overheating. When you operate the pro-
jector, do not cover or block these vents in any way.
Place the power-supply cord where no one can step on it or
trip over it. Do not place objects on the power cord that can
pinch or cut into the cord. Pay particular attention to power-
cord connection points at wall outlets, convenience recepta-
cles, and the projector input jack. If you must leave the pro-
jector unused or unattended for a period of time, shut the
unit off and unplug the power cord from the wall outlet. This
eliminates the risk of damage to the projector that can result
from power surges and lightning storms.
Before you attempt to replace the projector lamp,
Warning:
to avoid the risk of electrical shock, unplug the power cord
first from the AC wall outlet then from the projector AC
power-input jack.
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in the risk of fire
or electric shock.
Introduction 5