Remote Control - Polaroid Polaview SuperPortable 10 Quick Reference Manual

Quick reference guide
3
10 Turn on your computer.
11 Adjust the room lighting for optimum viewing. Adjust the

Remote control

5 Plug the projector power cord into an AC wall outlet.
6 If using an external audio source, connect it to the projector
AUDIO IN jack.
If using an external speaker system, connect it to the pro-
7
jector AUDIO OUT jack.
8 If using a television video source, connect it either to the
projector VIDEO or S-VHS jack, as appropriate.
9 Press POWER to turn on the projector and lamp.
angle of the projector mirror to eliminate any distortion to
your projected image.
To prevent the projector from overheating, do not
Caution:
block the air-intake and exhaust vents.
Before you attempt to replace the projector lamp,
Warning:
to avoid the risk of electrical shock, unplug the power cord
first from the AC wall outlet then from the projector AC
power-input jack.
Use the RC-8 remote control to change all the control panel
and Menu-mode on-screen control functions. Whenever
you press a remote-control key, the LED on the remote
control blinks rapidly. The remote-control keys share the
same functions as the corresponding keys on the projector
control panel.
To use the remote control, point it at the front of the projec-
tor and press a key, or bounce the infrared (IR) signal off
the projection screen.