Table of Contents
Advertisement
Appendix
Polaview 215E LCD Projector User's Guide
66
Lamp replacement procedure
Because of possibility of injury, strictly follow the lamp replacement
Caution:
procedure outlined below.
Order Lamp: 630146 Tools required: A coin.
After the cooling fan has stopped and the STANDBY(R) ON(G) indicator
1.
turns solid red, set the MAIN power switch to OFF and unplug the power
cord.
MAIN power switch
Please wait more than one hour before replacing the lamp.
Note:
If you need to replace the lamp more urgently
The LCD Projector has a forced cooling feature. After the POWER switch is
1.
turned OFF, and sometime during the first minute of the cooling fan operation,
press
and
at the same time. The cooling fan will change to high speed for
about 10 minutes. (The "C-d" STATUS CODE will be displayed.)
Grabbing the handle, place the LCD projector up on its side as
2.
illustrated.
Remove the lamp cover screws.
3.
First read the caution and warning labels on the lamp cover. Then, remove the
lamp cover screws (2) by using a coin, and take off the lamp cover.
lamp cover
screws
MA IN
OF F
ON
M AI N
coin
Advertisement
Table of Contents
