Table of Contents
Advertisement
Selecting the
Language for On-
Screen Displays
(for Model PV215E-C
only)
Selecting the Video
System Format
Using other useful functions
You may use buttons on the LCD projector or remote control unit for the
following operations.
The LCD projector can display screens in one of five different languages. The
procedure and on-screen displays shown below assume that an RGB signal is being
used as the input signal.
MENU
RGB ADJUST
RGB SYNC MENU
SET UP PROJECTOR
>LANGUAGE
/SPRACHE /LANGUE
/IDIOMA
/LINGUA
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Press MENU to display the menu.
1.
Press
or
to select LANGUAGE, and then press
2.
screen.
Press
or
to select the language.
3.
Press MENU twice to exit.
4.
The LCD projector is equipped with full NTSC, PAL, SECAM, PAL-M, PAL-N
and NTSC4.43 video support. Usually set to AUTO, the broadcast format is
automatically switched according to the tape inserted. If you experience poor color,
however, you may have to set to NTSC, PAL, SECAM, PAL-M, PAL-N, or
NTSC4.43 as described below.
S-VIDEO/VIDEO input is selected (page 34).
MENU
VIDEO ADJUST
SET UP PROJECTOR
>VIDEO SYSTEM
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA
/LINGUA
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Press MENU to display the menu.
1.
Press
or
VIDEO SYSTEM, and then press
2.
screen.
Press
or
to select the desired video system.
3.
Press MENU twice to exit.
4.
LANGUAGE
>ENGLISHINPUT DISP
ON
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
SELECT : PUSH
or
END
: PUSH MENU
VIDEO SYSTEM
>AUTO
PAL
SECAM
NTSC
PAL-M
PAL-N
NTSC4.43
SELECT : PUSH
or
END
: PUSH MENU
Getting started
or
to display the
or
to display the
English
35
Advertisement
Table of Contents
