Table of Contents
Advertisement
Input image
adjustment
Adjusting the projected image
This LCD projector's picture is set to standard specifications at the factory.
However, you can adjust the image to suit your own preferences by using the RGB
or VIDEO ADJUST feature. Three memory modes allow you to adjust and save up
to three sets of settings for each input signal (RGB and S-VIDEO/VIDEO).
For RGB signal input, three items can be adjusted: "BRIGHTNESS,"
"PICTURE," and "COLOR (White Balance)".
For VIDEO signal input, six items can be adjusted; "COLOR", "TINT",
"BRIGHTNESS", "PICTURE", "SHARPNESS", and "SUB COLOR" (white
balance).
When a PC-Card is inserted, the RGB "BRIGHTNESS" memory is used.
Note:
Only "BRIGHTNESS" can be adjusted.
RGB or S-VIDEO/VIDEO input is selected (page 33). Use the buttons on the
LCD projector or remote control.
MODE button
a
MENU button
b
Adjust
/
/
/
c
MODE button (remote control)
d
Press MENU to display the menu.
1.
RGB
MENU
>RGB ADJUST
RGB SYNC MENU
SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA
/LINGUA
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Press
or
to select RGB ADJUST or VIDEO ADJUST, and then press
2.
or
to display the screen.
Three different sets of control adjustments can be memorized for different
projection situations.
Adjust
e
(remote control)
MENU button (remote control)
f
buttons
S-VIDEO/VIDEO
MENU
>VIDEO ADJUST
SET UP PROJECTOR
VIDEO SYSTEM
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA
/LINGUA
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Getting started
POWER
FREEZE SHUTTER
MUTE
VOLUME
MODE
MENU
INPUT
d
STANDARD
e
LIGHT POINTER
a
b
c
/
/
/
buttons
English
f
39
Advertisement
Table of Contents
