Table of Contents
Advertisement
Canceling the
enlarging (scanning
line conversion)
function
Changing to 16:9
(wide) screen format
When a VIDEO/S-VIDEO signal in NTSC format or a signal with less than
800 x 600 dots (for example, 640x480 dots) is input, the LCD projector
automatically enlarges the image to 800 x 600 dots. This may cause picture quality
degradation. For a better image, select EXPANSION (VGA) or (NTSC):OFF by
the following procedure.
The procedure and on-screen displays shown below assume that an RGB signal is
being used as the input signal.
MENU
RGB ADJUST
RGB SYNC MENU
>SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA
/LINGUA
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Press MENU to display the menu.
1.
Press
or
to select SET UP PROJECTOR, and then press
2.
display the screen.
Press
or
to select EXPANSION (VGA) OR (NTSC), and then press
3.
or
to select ON or OFF.
Select OFF to cancel the enlarging (scanning line conversion) function.
Select ON to use the enlarging (scanning line conversion) function. (This is the
factory setting.)
Press MENU twice to exit.
4.
When a VIDEO or S-VIDEO signal in NTSC format is input, the image can be
displayed in 16:9 (wide) screen format by the following procedure.
S-VIDEO/VIDEO input is selected (page 34).
MENU
RGB ADJUST
RGB SYNC MENU
>SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA
/LINGUA
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Press MENU to display the menu.
1.
Press
or
to select SET UP PROJECTOR, and then press
2.
display the screen.
Press
or
to select 16:9 (NTSC), and then press
3.
or OFF.
Select OFF to return the normal screen. (This is the factory setting.)
Select ON to display in 16:9 (wide) screen format.
Press MENU twice to exit.
4.
Even if the 16:9 (wide) screen feature is set to OFF, when an "S1" signal is
Note:
input, the image is automatically displayed in 16:9 (wide) screen mode.
SET UP PROJECTOR
FRONT/REAR
FRONT
INPUT DISP
ON
REMOTE POWER
ON
>EXPANSION (VGA)
ON
LAMP TIME RESET
NO
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
SET UP PROJECTOR
FRONT/REAR
FRONT
INPUT DISP
ON
REMOTE POWER
ON
>16:9 (NTSC)
OFF
EXPANSION (NTSC)
NO
LAMP TIME RESET
NO
SELECT : PUSH
or
SET
: PUSH
or
END
: PUSH MENU
Getting started
or
to
or
to
or
to select ON
English
37
Advertisement
Table of Contents
