Table of Contents
Advertisement
Turning off the power
Top view
Side view
Press the POWER button on the LCD projector or remote control to
1.
turn off the power.
The STANDBY(R) ON(G) indicator flashes red while the LCD projector
cools down, and then changes to solid red when the fan stops after about a
minute.
Set the MAIN power switch on the LCD projector to OFF.
2.
Positioning the LCD projector and screen
The screen should be positioned so that it is not directly touched by sunlight or
room light, as this will wash out the colors of the picture, making it hard to see.
When possible, close all blinds and curtains and dim the lights. Also, the projector
should be at a 90° angle to the screen for the best results. To determine the distance
for the desired size, please refer to the LCD projector/relative screen position chart
on page 32.
S-VIDEO VIDEO IN
L-AUDIO IN-R
RS232C
RGB IN
AUDIO IN
RGB OIUT
AUDIO OUT
Your LCD projector is equipped with an image reverse feature. So, in addition to
front projection, you can also reverse the image for rear projection. (See page 19)
Getting started
a
c
d
e
English
b
31
Advertisement
Table of Contents
