Table of Contents
Advertisement
Getting started
Turning on the power
Polaview 215E LCD Projector User's Guide
30
Turning the power on and off
If the MAIN power switch on the LCD projector is pressed while the cooling fan is
still operating, the operating life of the projector lamp will be shortened. Be sure to
follow the procedure outlined below when turning the LCD projector power
supply on and off.
POWER button/STANDBY(R)
a
ON(G) indicator
MAIN power switch
b
Insert the power cord into the LCD projector AC socket and connect it
1.
to a properly grounded wall outlet.
Set the MAIN power switch on the LCD projector to ON.
2.
The STANDBY(R) ON(G) indicator lights red.
The first time you turn on the power, or whenever the STANDBY(R) ON(G)
indicator is not lit, press the MAIN power switch (ON/OFF) to turn on the
power.
Press the POWER button on the LCD projector or remote control to
3.
turn on the power.
The STANDBY(R) ON(G) indicator flashes green while the LCD projector is
warming up, and then changes to solid green when the picture is projected on
the screen after approximately 45 seconds.
When the power is on, the STANDBY(R) ON(G)
POWER
indicator indicates the operating condition of the lamp.
STANDBY (R)
ON (G)
Red
Green
Flashing green
Flashing red
When POWER is first pressed, and while the LCD projector is
Note:
warming up, the "Polaroid" letter will be projected on the screen for
approximately 30 seconds. During the warm-up period, no other picture can be
projected on the screen.
a
MA IN
OF F
ON
b
c
M AI N
AC socket
c
POWER button
d
(remote control)
MAIN power on (lamp off)
Lamp is ready
Warming up
Cooling fan operating
d
POWER
FREEZE SHUTTER
MUTE
VOLUME
MODE
MENU
INPUT
STANDARD
LIGHT POINTER
Advertisement
Table of Contents
