Table of Contents
Advertisement
16 Detailed setup
Turning on the projector and lamp
Be sure that the projector is in the open position and that
you have lifted and rotated the mirror to its proper position,
as described in the previous chapter. Then follow these
steps:
1 Press POWER on the control panel to turn on the projector.
The control panel lights up and the projector lamp lights.
(When you turn on the projector, the projector lamp lights
automatically.) Initially the projection screen is blue. After
initialization, the Polaroid logo appears.
Warning:
To prevent burning yourself when you are operat-
ing the projector, avoid touching the lamp-access door and
the surrounding area. The lamp-access door is on the bot-
tom of the projector.
2 Turn on your computer. As you do so, the Polaroid logo dis-
appears from the projection screen, and the computer
screen image appears in its place.
The cooling fans protect the projector from heat
Caution:
generated by the projector lamp. Make sure never to block
the air intake and exhaust vents. These vents are located on
the top and on both sides of the projector.
3 Adjust the room lighting for optimum screen viewing.
4 Adjust the mirror angle to attain the best screen image.
If you wish, you can press the POWER button to turn off the
projector and lamp until the start of your presentation.
Advertisement
Table of Contents
