Table of Contents
Advertisement
Basic LCD projector operation
Before you begin, make sure...
• You have read Important safeguards. (See page 7)
• All connections are made. (See page 20)
• The LCD projector is positioned properly. (See page 31)
• The LCD projector is plugged in.
• The lens cap is removed.
VOLUME +/- buttons
a
INPUT button
b
FREEZE button (remote control)
c
MUTE button (remote control)
d
Turn on the power.
1.
(See "Turning the power on and off" on page 30)
Press INPUT on the LCD projector or remote control unit to select the
2.
desired input signal.
RGB
PC-CARD
Continue to press INPUT to set the desired input signal. Each press will
change the display as shown above.
You can turn the input signal display off. (See "Turning off the input signal
display" on page 36.)
Turn on your computer (RGB) or start video playback (S-VIDEO or
3.
VIDEO).
Adjust FOCUS and ZOOM rings if necessary. (See "Adjusting the lens" on
page 19)
c
a
d
b
INPUT button (remote control)
e
VOLUME +/- button
f
(remote control)
SHUTTER button
g
(remote control)
S-VIDEO OR VIDEO
Getting started
g
POWER
FREEZE SHUTTER
MUTE
VOLUME
f
MODE
MENU
INPUT
e
STANDARD
LIGHT POINTER
English
33
Advertisement
Table of Contents
