Getting started
How to use the remote control unit
You can use the remote control unit in place of the computer's mouse.
If PC-Card or Video mode is selected as the input signal mode for the LCD
Note:
projector, the ProMouse feature cannot be used. (This includes the Pointer, Stamp
and Line functions.)
POWER
FREEZE SHUTTER
MUTE
VOLUME
MODE
MENU
INPUT
STANDARD
LIGHT POINTER
a
Click 2 button
a
Mouse button
b
POINTER button: Each press will change the mouse
cursor mode as shown below.
Mouse
Pointer
Mouse button: This can be used in place of the computer's
mouse pointing device to move the screen cursor.
Click 1 button: This button corresponds to the button on a single-button mouse,
or to the left button on a standard mouse with two buttons.
• When this button is pressed in Stamp mode, you can mark the screen with a
stamp.
• When this button is held down and used with the mouse button in Line mode,
you can paint a line on the screen.
Click 2 button: This button corresponds to the right button on a standard mouse
with two buttons.
• When in mouse cursor mode (Pointer, Stamp, or Line), you can return to
mouse mode by pressing this button.
c
b
Pointer button
c
Click 1 button
d
Stamp
Line
Getting started
d
cursor button
English
17