Table of Contents
Advertisement
Appendix
LCD panels
Drive method
No. of pixels
Lens
Projector lamp
Contrast ratio
Brightness
Number of colors
Screen size
Projection (throw) distance
Lens axis shift
Color systems
*VIDEO input signal
*S-VIDEO input signal
RGB input signal
RGB output signal
Connectors
Controls
Polaview 215E LCD Projector User's Guide
70
Specifications
0.9" Polysilicon LCD panel X3,
RGB shutter method, using translucent TN crystal panels
Active Matrix 4:3 aspect ratio panels, TFT (Thin Film Transistor)
480,000 (800 x 600) stripe pixels x 3 panels
1-1.3 zoom lens, F2.5-2.7, f37-48mm manual focus
150 W High Pressure Mercury Lamp
150:1
600 lumens
16,777,216
20"-300" (measured diagonally)
0.97 m-15.8 m (3.18'-51.84')
1:9 Low position
PAL/SECAM/NTSC/PAL-M/PAL-N/NTSC4.43
1Vp-p, sync negative, 75 terminated
Y (luminance signal): 1 Vp-p, sync negative, 75 terminated C (chrominance signal):
burst 0.286 Vp-p, 75 terminated
Video signal
Sync signal
H-Frequency
V-Frequency
RGB
HD/SYNC
VD
S-Video input: Mini DIN 4-pin X 1
Video input: RCA pin X 1
Video Audio input: RCA pin X 2 (L+R)
Serial port (RS-232C): Mini DIN 8-pin X 1
RGB display input: D-sub HD 15-pin X 1
RGB audio input: M3 stereo mini pin X 1
RGB display output: D-sub HD 15-pin X 1
Audio output: M3 stereo mini pin X 1
PC card slot: PCMCIA Type II X 1
Cabinet buttons/Switches
Remote control unit buttons
RGB analogue (0.7 Vp-p, 1.0 Vp-p with sync on green, 75 )
Unlimited number of colors
H/V separate, H/V composite, or sync on green.
24.83-60.24 kHz (TTL Level) Refer to page 26.
56.25-85.1 Hz (TTL Level) Refer to page 26.
RGB analogue (0.7 VP-p, 1.0 Vp-p with sync on green, 75
Same polarity as HD/SYNC terminal of RGB IN connector
(TTL Level)
Same polarity as VD terminal of RGB IN connector
(TTL Level)
MAIN POWER ON/OFF, VOLUME +/-, MODE,
MENU, INPUT,
,
,
Power ON/OFF, Freeze, Shutter, Mute, Volume +/-, Mode,
Menu, Input,
,
,
,
, Light, Pointer, Mouse, Click1,
Click2
,
, Release
Advertisement
Table of Contents
