Getting Started; Connecting To Power - Polaroid PV330 User Manual

Getting Started

Getting Started
Connecting to
Power
2 English
This section explains how to set up and connect the projector, including
information about basic adjustments and interfacing with peripherals.
Important: To avoid damage to electronic components, first connect the
power cord to the AC socket on the projector, then connect the
plug to an AC outlet.
To connect to power:
1 Connect the power cord to the AC socket on the projector.
2 Connect the power cord plug to an AC outlet.
Figure 1: Connecting the Power Cord
The projector enters the sleep state, with the fans and lamp off. The
Power On/Standby LED, the Lamp Age LED, and the Lamp Status LED
on the projector keypad are on while the projector is in the sleep state. For
more information on the projector's operating states, see "Operating
States" on page 14.
Direction
keys
Menu
Figure 2: Projector Keypad
AC socket
Power On/Standby
LED
Lamp Status LED
Lamp Age LED
Source