Getting Started - Polaroid Polaview 220 User Manual

Getting started

Positioning the
projector
Ceiling mount
Transporting the
projector
Projector cooling
and airflow
Place the projector on a solid, flat surface at a right angle
(perpendicular) to the projection screen and parallel to the
floor. If you use a media cart, make sure the wheels are
locked to prevent it from moving.
Opening the casing of your projector could damage the
components inside and will void your warranty. Dropping
or mishandling the projector can damage the optical path.
The projector is capable of displaying inverted images
for ceiling mount configurations, but special mounting
equipment is required for mounting the unit. A qualified
technician, responsible for meeting safety standards and
obtaining any and all required safety inspections, should
install this equipment.
The projector has a handle located on one of the side panels.
Always use the handle to transport the projector.
For air travel, the standard carrying case with wheels is
adequate for transporting your projector as carry-on luggage
only. If you check your projector through as regular luggage,
ship it in the optional ATA-style case only.
Let the projector cool as required by allowing for proper
airflow through its ventilation system. Air intake and exhaust
grills are on the bottom of the projector.
Never operate the projector if these grills are
Caution:
clogged or obstructed, or if the electric fans are not running.
Detailed setup 9