Wall-Mounting Kit (Kx-B063); Accessories - Panasonic Panaboard KX-BP800U Operating Instructions Manual

Wall-mounting Kit
Before attempting installation of this wall-mounting kit, we strongly recommend consulting with the building
facility nor manager, engineer or architect. The installer needs to know the type of construction used for the wall
intended for this installation and the location of wall studs. Selection of hardware is critical for safe wall-mounting,
and dependent upon the nature of wall construction, installation should not occur until this consultation takes
place.
Procedure for KX-B063 Wall-mounting Kit Installation
. Tools required:
One (1) KX-B063 kit
A minimum of eight (8) pieces of appropriate wall-support hardware (molley, toggle, etc.)
NOTE : THIS HARDWARE MUST BE LOCALLY PROCURED, IT IS NOT INCLUDED IN THE KIT.
Drill (and drill bit of correct size) for hardware installation
Screw driver (Both phillips (+) and slotted (-) will be required.)
Tape measure
Tape or thumb-tacks (2pcs)
Bubble type level
. Pre-requisites
1. Before installation, make sure that the wall intended for installation is capable of supporting
flush-mounted.
[KX-BP800 series is 103 kgf.]
2. The position of the intended installation is of adequate size for the selected Panaboard.
[KX-BP800 series is 1,575 mm x 1,524 mm.]
3. An outlet is within 3 m, and it is not located directly behind the Panaboard.

Accessories

The package includes the parts noted below ; please confirm that all parts are present before beginning
installation. Eight screws for mounting the fixtures on the wall are not provided. Please purchase the
appropriate wall-mounting hardware (sold in stores). Refer to pages 93 and 94.
No. Part name Part illustration, Q'ty
Wall-mounting
fixture L
Wall-mounting
fixture R
Wing bolt
These are used for other models.
(KX-B063)
Order
of use
L
x 2 3
R
3
x 2
x 2
-
M5 x 12 mm
No use*
No. Part name Part illustration, Q'ty
Screw
Wall-mounting
template
No use*
Use the wall-mounting
template provided with
KX-BP800 series.
Order
of use
x 4
-
M4 x 16 mm
No use*
x 1
2
91