Using The Interactive Panaboard Software; Start Up The Interactive Panaboard Software - Panasonic Panaboard KX-BP800U Operating Instructions Manual

Using the Interactive Panaboard Software

Start up the Interactive Panaboard Software

1
Turn on the power of the Interactive Panaboard.
2
Turn on the computer's power and start up Windows.
3
Click the [Start] button, and then click [Programs] • [Panasonic] •
[Interactive Panaboard] •
®
(For Windows
• The Interactive Panaboard Software runs, and the COM detection
dialog box appears to show the Interactive Panaboard is detected.
4
Click the [OK] button.
• The Select Mode dialog box will appear.
5
Click either the [Projector] button or the [Whiteboard] button,
and then click the [OK] button.
When the Projector mode is selected:
The calibration start screen will be displayed, then calibrate to adjust the position of the projected image and
the position of the Interactive Panaboard screen.
When the calibration is completed and the Projector mode become active, the icon
Taskbar and the Desktop Drawing Tool will appear automatically.
• In the Projector mode, the Desktop Drawing Tool is used for operation.
The View window is used for playback and for editing a file which is recorded in the Projector mode.
For operation of the Projector mode, refer to "Projector Mode" from page 34.
When the Whiteboard mode is selected:
The icon will be registered in the Taskbar and the Whiteboard window will appear automatically.
• In the Whiteboard mode, the contents of the drawing on the Interactive Panaboard Screen will be displayed
in the Whiteboard window.
The Whiteboard window is also used to playback and to edit a file which is recorded in the Whiteboard
mode.
For operation of the Whiteboard mode, refer to "Whiteboard Mode" from page 51.
Remark:
• If the Interactive Panaboard is not detected, the notification dialog box
appears.
In this case, check the status of the Interactive Panaboard and
confirm that the interactive cable is connected. For details on the
settings of the communications (COM) port, refer to "COM port" on
page 31.
• If the Interactive Panaboard Software is used without connecting the Interactive Panaboard, click [Offline]
button in the notification dialog box.
In the offline state, a file recorded in the Projector mode or the Whiteboard mode can be played back and
edited.
• The tool tip text displayed when the mouse is located over the icon
determine the current mode.
Projector mode:
Whiteboard mode:
[Interactive Panaboard].
XP, [All Programs] instead of [Programs])
"Interactive Panaboard (Projector)"
"Interactive Panaboard (Whiteboard)"
will be registered in the
in the Taskbar allows you to
29