Panasonic UB-T780 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Interactive whiteboard
  5. ELITE PANABOARD UB-T780
  6. Operating instructions manual

Panasonic UB-T780 Operating Instructions Manual

Hide thumbs Also See for UB-T780:
Table of Contents

Advertisement

Quick Links

Installation Manual Included (for qualified service personnel)
• To assemble this unit, please refer to the Installation Manual on pages 32 through 56.
• Before operating this unit, please read these instructions completely and keep them carefully for future
reference.
• This unit is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of
this equipment.
For U.S.A. only:
• To locate the closest authorized dealer in your area, please call 1-800-449-8989.
Operating Instructions
(For Basic Operations)
(elite Panaboard)
Model No.
UB-T780
Stand is sold separately.
Electronic Board
UB-T780

Advertisement

Table of Contents
loading

Related Manuals for Panasonic UB-T780

Summary of Contents for Panasonic UB-T780

  • Page 1 Operating Instructions (For Basic Operations) Electronic Board (elite Panaboard) UB-T780 Model No. UB-T780 Stand is sold separately. Installation Manual Included (for qualified service personnel) • To assemble this unit, please refer to the Installation Manual on pages 32 through 56.

  • Page 2: Feature Highlights

    Introduction Introduction Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Feature Highlights By connecting the elite Panaboard to a computer and using a projector to display the contents of the computer’s screen on the elite Panaboard, you can do the following.
  • Page 3 Introduction Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Serial number Dealer’s name Dealer’s address Dealer’s tel no. About the Operating Instructions There are 2 separate operating manuals for the elite Panaboard. For Basic Operations Instructions for connecting and operating the elite Panaboard, as (this document)
  • Page 4 Introduction • All other trademarks identified herein are the property of their respective owners. Federal Communications Commission Requirements For United States Only Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

  • Page 5: System Requirements

    For details about the system requirements, refer to the Operating Instructions (For Software). Exemption of Liability Panasonic System Networks Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to, the following: Altering the device or improper installation construction.

  • Page 6: Table Of Contents

    Table of Contents Table of Contents For Your Safety ..................7 For Your Safety .........................7 For Users ...........................7 Safety Information (For United Kingdom Only) ............10 Precautions ........................11 Warning Label .........................12 Usage ......................13 Included Accessories .....................13 Names and Uses of the Parts ..................14 Connecting External Components ................17 Installing the elite Panaboard software ................20 Setting the Projector .......................21...

  • Page 7: For Your Safety

    For Your Safety For Your Safety For Your Safety For Users To prevent severe injury and loss of life, read this WARNING section carefully before using the unit to ensure proper and safe operation of your unit. • This section explains the graphic symbols used in Power and Ground Connection this manual.
  • Page 8 For Your Safety Installation and Relocation Plug the power cord firmly into an AC outlet. Otherwise, it can cause fire or Have the unit installed, removed and electric shock. disposed of only by qualified service personnel. Do not pull, bend, rest objects on, or chafe the power cord and plug.
  • Page 9 For Your Safety Make sure that the battery is installed CAUTION with the correct polarity as indicated on the battery holder. Incorrectly installed batteries may burst or leak, resulting in injuries. Power Batteries that seem worn down or damaged should not be used. Using When the unit is not used over an extended period of time, switch it off and worn down or damaged batteries may...

  • Page 10: Safety Information (For United Kingdom Only)

    If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. Operating Safeguards IF THE FITTED MOULDED PLUG IS UNSUITABLE...

  • Page 11: Precautions

    For Your Safety Precautions As the colours of the wire in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, About Using the Battery proceed as follows. If a battery is used improperly, the battery may leak, The wire that is coloured GREEN-AND-YELLOW causing corrosion of the unit, or it may burst.

  • Page 12: Warning Label

    For Your Safety Warning Label WARNING: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PBQAA0582ZA Operating Instructions (For Basic Operations)

  • Page 13: Usage

    Usage Usage Included Accessories Check that all of the following items are included with your elite Panaboard. In the event that an item is missing, please contact your dealer. List of Accessories Power Cord USB Cable Software CD-ROM (3 m [9 ft. 10 in.]) (5 m [16 ft.

  • Page 14: Names And Uses Of The Parts

    Usage Names and Uses of the Parts Screen Front View Position Sensor Detects the position of the electronic pen. Do not block the sensor while operating the elite Panaboard. Screen Board Project the contents of a computer screen using a projector.
  • Page 15 Usage Electronic Pen Penpoint When you push down on the penpoint, ultrasonic waves and infrared signals are transmitted, and equivalent of a left mouse click is performed. Ultrasonic Emitter Do not block this area with your fingers. Doing so will prevent the elite Panaboard from correctly detecting the electronic pen's position.
  • Page 16 Usage Inserting (Replacing) Batteries 1. Remove (replace) the battery cover. 2. Insert (exchange) the battery and replace the cover. • When replacing the cover, follow the procedure in • Make sure to use a AAA alkaline battery, and reverse. ensure that face the correct directions.

  • Page 17: Connecting External Components

    Usage Connecting External Components Set the power switch to "O" (OFF), connect the power cord (included) to the elite Panaboard, and plug the power cord into an AC outlet. Rear Power Switch (ON) (OFF) Power Cord (Included) Power Cord • Plug the power cord into an outlet that is close to the elite Panaboard and in a location that is easy to unplug.
  • Page 18 Usage Connect the elite Panaboard to a computer using the USB cable (included). • elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port. Computer: Plug the A connector (larger connector) into a USB port on the computer. •...
  • Page 19 Usage Moving the elite Panaboard When Using the Stand (Sold Separately) Make sure that the power switch is set to "O" (OFF), and disconnect the power cord and USB cable. Release the locks on the casters. Move the elite Panaboard, avoid banging or shaking the board. Notice •...

  • Page 20: Installing The Elite Panaboard Software

    When installation has finished, click [Finish]. • Restart your computer if you are prompted to do • The group [elite Panaboard] will be created in the [Panasonic] group in the program menu. • The following items will appear in the [elite Panaboard] group: –...

  • Page 21: Setting The Projector

    Usage Project the Image as a Rectangle Setting the Projector • Adjust the location of the projector to project at a Set up your projector as instructed below. right angle with the elite Panaboard. About Positioning the Image • When you are projecting an image, make sure that the edge of the projected image is at least 5 mm in.) from the screen frame.

  • Page 22: Setting Your System (Calibration)

    Usage Setting Your System • If the image is projected trapezoidally, the position of the electronic pen may not be read (Calibration) correctly. Adjust the projector so that the projected image is a rectangle. Refer to your projector's documentation for information on About Calibration adjusting the projected image.

  • Page 23: Starting The Elite Panaboard Software And Performing Calibration

    Usage Starting the elite Panaboard software and Performing Calibration Turn on the elite Panaboard. Connect the elite Panaboard to your computer with the USB cable. • Hold and press the electronic pen at a right • The elite Panaboard software starts angle to the screen board.

  • Page 24: Uninstalling The Elite Panaboard Software

    Control Panel. • In Windows 2000, select [Add/Remove Programs], and in Windows Vista or Windows 7, select [Uninstall a program]. Select Panasonic elite Panaboard, then remove Follow the on-screen instructions. When uninstallation is complete, restart your computer. [Desktop Drawing Tool] •...

  • Page 25: Viewing The Electronic Documentation

    "Operating Instructions (For Software)". Turn on your computer and start Windows. Open "Operating Instructions (For Software)" from the Start menu. ([Start] ® [All Programs] ® [Panasonic] ® [elite Panaboard] ® [Operating Instructions for Software]) • The electronic documentation will be displayed.

  • Page 26: Appendix

    Appendix Appendix Daily Care When cleaning the elite Panaboard or inside the elite Panaboard, make sure to switch off the power and unplug the power cord from the AC outlet. Cleaning the elite Panaboard Replacing the Battery in the Electronic Pen When the charge in the battery in the electronic pen is low, the message, "The pen battery is low.

  • Page 27: Replacing The Penpoint Of The Electronic Pen

    Appendix Replacing the Penpoint of the Electronic Pen As the penpoint of the electronic pen becomes worn, a hole will appear in the penpoint. Continuing to use the electronic pen in this condition can cause damage to the screen or unsatisfactory operation, so replace the penpoint with a new one as soon as possible.

  • Page 28: Troubleshooting

    Appendix Troubleshooting When experiencing problems, please refer to the table below for possible solutions. If the problem persists, contact your dealer. Symptom Possible cause and solution page The LEDs do not light Check that the power cord is properly plugged in. when the power switch is –...
  • Page 29 Appendix Symptom Possible cause and solution page The message "The pen The electronic pen’s battery is weak. battery is low. Replace the → battery soon." is displayed Replace the electronic pen’s battery. on the computer screen. Because the elite Panaboard is designed exclusively for projector Marks written with a images, you cannot erase the marks with a standard eraser.

  • Page 30: Specifications

    5 mm ( in.) LR03 (AAA alkaline dry cell battery) ´ 1 Electronic Pen Power Electronic Pen Battery Life 30 hours (when used continuously at 25 °C [77 °F]) * When using Panasonic LR03 alkaline dry-cell batteries. Operating Instructions (For Basic Operations)

  • Page 31: Supplies & Accessories

    Appendix Supplies & Accessories Optional Device Electronic Pen UE-608025 Stand KX-B061 Install-Free Kit UE-608050 • To purchase separately sold items, contact your dealer. Operating Instructions (For Basic Operations)

  • Page 32: Installation Manual

    Before constructing or installing the elite Panaboard, please read "Installation Manual (for qualified service personnel)" carefully. Especially, please read "For Your Safety" carefully and install the elite Panaboard safely. Panasonic System Networks Co., Ltd. cannot be held responsible for accidents or damage to property resulting from incorrect installation. •...
  • Page 33 Installation Manual Have the unit installed, removed and CAUTION disposed of only by qualified service personnel. After installing or moving the electronic board, lock the casters and set the fall-prevention extension legs. Locking the casters (Push this side) Push to lock If the unit is hung on a wall, confirm the wall must be capable of supporting at least the following weight.

  • Page 34: Included Accessories

    Installation Manual Included Accessories Confirm that the following items are included with the elite Panaboard. Part Name Illustration Q’ty Remarks The illustration of the power cord is for the Power Cord United States. The (3 m [9 ft. 10 in.]) shape of the plug may vary depending on country/area.
  • Page 35 Installation Manual Part Name Illustration Q’ty Remarks May not be included Warranty depending on country/ area. Notice • Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6, appropriate for your type of wall (page 38). Operating Instructions (For Basic Operations)

  • Page 36: Wall Mounting Construction

    Installation Manual Wall Mounting Construction Checking the Wall When mounting on a wall, consult with your building's owner, caretaker or construction manager to determine if the wall strength is sufficient to install the elite Panaboard. For safety, install the elite Panaboard only after thoroughly understanding the type of walls, the appropriate types of screws and the construction method (Page 38).

  • Page 37: Installing The Wall Mounting Plates

    Installation Manual Installing the Wall Mounting Plates Ensure that the wall is strong enough to support the elite Panaboard. Rated strength: greater than 1,324 N (135 kgf) Using the measuring tape and level, mark the 8 locations to insert the screws. 469.5 mm 813 mm 222.5 mm (8...

  • Page 38: Wall Types And Installation Procedures

    Installation Manual • Tighten the bolt so that it will not become loose. • When drilling the holes and installing the wall mounting plates, follow the procedure in "Wall Types and Installation Procedures" (page 38). Mount the elite Panaboard on the wall. See "Assembling the elite Panaboard"...
  • Page 39 Installation Manual Plasterboard walls Split-wing toggles (not included) are needed. Insert the bolt through the hole in the wall Split-wing toggle mounting plate and into the hole in the wall Plasterboard so that the arms of the split-wing toggle are horizontal.

  • Page 40: Stand Assembly (Sold Separately)

    Installation Manual Stand Assembly (Sold Separately) Included Parts Check that the following parts are included with the stand (KX-B061). Part Name Illustration Q'ty Stand Base Support Beam Cross Bar (A) Cross Bar (B) Screw (M6 ´ 45 mm [1 in.]) Two-wing Bolt (M5 ´...

  • Page 41: Assembly Instructions

    Installation Manual CAUTION Before assembly, be sure to lock the casters. Locking the casters (Push this side) Assembly Instructions Assemble the fall-prevention extension legs. Operating Instructions (For Basic Operations)
  • Page 42 Installation Manual Assemble the stand. Assemble with the holes toward the front. REAR Locking caster side (rear) Locking caster side (rear) FRONT Notice • Do not over-tighten the screw ( ). (Doing so can warp the support beams.) • Assemble the stand so that the locking casters are on the rear side. Operating Instructions (For Basic Operations)
  • Page 43 Installation Manual Pull the fall-prevention extension legs down. Note • When folding back the fall-prevention extension legs, release the lock as follows ( Mount the elite Panaboard. See "Assembling the elite Panaboard" (For Mounting on a Stand (Sold Separately) ® page 52). Operating Instructions (For Basic Operations)

  • Page 44: Assembly Instructions

    Installation Manual Assembly Instructions Preparing for Removing the elite Panaboard from Its Packaging Open the box, remove the accessory box & packing foam and open the plastic sheet of the elite Panaboard. Shipping Box Accessory Box Contents ] ....•...

  • Page 45: Assembling The Elite Panaboard

    Installation Manual For Wall Mounting (with 2-part lower Assembling the elite Panaboard frame cover) Note Loosely wrap the power cord with the cable tie, • There are 2 types of lower frame covers for the and plug the power cord into the AC inlet. elite Panaboard: a lower frame cover made •...
  • Page 46 Installation Manual Pull the loose end of the cable tie to tighten it, Remove the screw (A) of the attachment cover and install the power cord depending on the (B), which is fixed to the attachment board, and location of the outlet, as illustrated in the slide the attachment cover down.
  • Page 47 Installation Manual Unscrew the 4 screws from the front lower Fasten to the wall. frame cover. Fasten the lower portion of the board attachment securely to the wall. Lift the bottom of the front lower frame cover to remove it. Attach the front lower frame cover.
  • Page 48 Installation Manual For Wall Mounting (with 1-part lower Wipe the screen board surface. Gently wipe the screen board surface with a soft, frame cover) moist cloth. Loosely wrap the power cord with the cable tie, and plug the power cord into the AC inlet. •...
  • Page 49 Installation Manual Pull the loose end of the cable tie to tighten it, Remove the screw (A) of the attachment cover and install the power cord depending on the (B), which is fixed to the attachment board, and location of the outlet, as illustrated in the slide the attachment cover down.
  • Page 50 Installation Manual How to Attach the Lower Frame Cover Remove the lower frame cover. Remove the left and right screws, and then remove Holding the lower frame cover with both the lower frame cover from the main unit of the elite hands, slide it into the guides on both sides.
  • Page 51 Installation Manual Pull the lower frame cover ( Wipe the screen board surface. Gently wipe the screen board surface with a soft, While keeping the rear section of the lower moist cloth. frame cover against the rear of the board, push the lower frame cover up into the rear of the board ( Push the lower frame cover backward (...
  • Page 52 Installation Manual For Mounting on a Stand (Sold • When attaching the power cord along the lower side of the elite Panaboard. Separately) Attach the power cord. • Connect the power cord to the elite Panaboard before installing on the stand. Power Cord Hang the elite Panaboard on the stand with the screw heads.
  • Page 53 Installation Manual Secure the elite Panaboard to the stand frame Wipe the screen board surface. using the two-wing bolts (M5 ´ 12 mm [ Gently wipe the screen board surface with a soft, in.] moist cloth. [2 count]) included with the stand. Notice •...

  • Page 54: Confirming The Elite Panaboard Operation

    Installation Manual Confirming the elite Panaboard Operation After assembling the elite Panaboard, confirm that it operates properly by following the procedure below. Checkpoints Action Operation Measure Turn on the power. Green LED lights. (Normal operation) Green LED does not light, or Check the power cord.
  • Page 55 Installation Manual • With the elite Panaboard software running, enter White Background mode and select the marker tool. Confirm operation by writing on the screen board with the electronic pen and checking that the writing is displayed on the computer's screen. (Your writing with the electronic pen will not appear on the screen board itself.) Operating Instructions (For Basic Operations)

  • Page 56: Repackaging

    Installation Manual Repackaging To repackage the elite Panaboard, perform steps in the following "Assembling the elite Panaboard" in reverse. For Wall Mounting (with 2-part lower frame cover) ® page 45 • • For Wall Mounting (with 1-part lower frame cover) ® page 48 •...
  • Page 57 Notes Operating Instructions (For Basic Operations)
  • Page 58 Notes Operating Instructions (For Basic Operations)
  • Page 59 Notes Operating Instructions (For Basic Operations)
  • Page 60 Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. (For EU only) © Panasonic System Networks Co., Ltd. 2007...

Table of Contents