The Control Panel - Panasonic Panaboard KX-BP800U Operating Instructions Manual

The control panel

Name Panel
Contrast /
Remaining
Film
Indicator
Contrast
Key
2-Screen
1 2
Copy Key
Copy Key
Multi -
Copy /
Error
Indicator
Multi-
Copy /
Stop Key
Advance
Key
This lamp indicator notifies the user when the time to replace the
thermal transfer film is approaching (estimated) and of the printing
contrast used during copying.
Indicator off : Normal printing contrast.
Indicator on : Darker than normal printing contrast.
Indicator flashing :*Almost time to replace the thermal transfer film.
(Note that only about 15 more sheets may be copied when
this indicator starts flashing.)
Replacement film (KX-BP081 or KX-BP082) is separately
available from the dealer where you purchased your unit.
*The flashing indicator will go out after the power is turned off and the printer
has been opened and closed. (When copying is performed, this indicator will
begin flashing again.)
Each time this key is pressed, the unit will alternate between normal
and dark contrast modes (Normal / Dark).
This key causes the front and back of the screen to be copied on a
single sheet of paper.
This key prints a copy of the screen.
This indicator displays the number of copies to be made. The display
changes each time the multi-copy / stop key is pressed.
...
Example 1 2
When an error occurs, a flashing symbol will appear in this display to indicate the
error status. (See page 79.)
When making multiple copies, press this key until the desired
number of copies is displayed on the multi-copy / error indicator.
This key can also be pressed while multiple copies are being made
to stop the copying process. The display indication changes while
multiple copies are being made as shown below. After reaching 0,
the display will reset to 1.
Example: 5 4 3
copying)
This key advances the screen from right to left.
Part Names and Functions
Description
...
9 1
2 1 0 1 (countdown display during
13