Replacing Thermal Transfer Film - Panasonic Panaboard KX-BP800U Operating Instructions Manual

Replacing Thermal Transfer Film

The unit is capable of producing about 15 more copies when the contrast / remaining film indicator begins to
flash. The unit has run out of thermal transfer film and can no longer make copies when the multi-copy / error
indicator flashes " ". Separately available replacement film (KX-BP081 or KX-BP082) may be purchased from
the dealer where you purchased the unit. Thermal transfer film is replaced as follows.
Notes on Replacing Thermal Transfer Film
• Only use the designated product (KX-BP081 or KX-BP082) from Panasonic as the replacement film.
(Note that using another type of replacement film may result in degraded printing quality or damage to
the unit.)
• Thermal transfer film is disposable. Dispose of used thermal transfer film as "burnable" or "non-
recyclable" rubbish.
• A negative of the copied image will remain on the thermal transfer film. To protect the security of your
information, we recommend cutting up used thermal transfer film with scissors or shredder before
disposing of it.
1
Push down the printer open lever to open
the printer door, and remove the film
cassette with both hands.
2
Remove the used thermal transfer film from
the film cassette and remove the four gears.
3
Next, perform steps 3 to 7 in the section
entitled "Installing Thermal Transfer Film"
that can be found on pages 14 and 15.
20
Film
Cassette
Thermal Transfer Film
Blue Gear
Green Gear
Thermal
Transfer Film
Film Cassette
Printer Open
Lever
Direction for
Removing
Thermal
Transfer Film
Green Gears