[Stand (option)] [Wall-mounting (option)] The unit in this picture is UB-5325. (Stand and Wall-mounting kit are optional.) • To assemble this unit, please refer to the Installation Manual. • Before operating this unit, please read these instructions completely and keep them carefully for future reference.
Page 2
Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Model number: _________________________ Serial number: _________________________ Dealer’s address: ______________________________________________________________________ • Thermal transfer film ....1 •...
A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely.
Precautions Never remove the cover, take apart or modify the product. This will void the warranty. Do not put drinks, other liquids or heavy items on the tray or screen. Do not use the electronic board in an excessively humid or dusty location. Do not position the electronic board in a location where it is unstable.
Precautions Do not lean against the screen or on the cover (lower), even if the electronic board is mounted on the wall. CHOKING HAZARD Keep the marker’s cap out of reach of children to prevent swallowing. ■ CD-ROM To prevent the CD-ROMs from accidental damages: Do not touch or write on the surface of the disc.
Page 7
• Use a shielded USB cable that is certified as logo by USB-IF. • If you connect the electronic board to a USB hub, it is not guaranteed to work. • Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.
Open this cover to remove jammed paper. load copy paper. (See pages 10, 15.) Scanner Screen Tray Stand The stand is optional. Control Panel (See page 9 for details.) Power Switch AC Inlet Cord Holder Power Cord...
■ Control panel Contrast/Remaining Film Indicator Contrast Key 2-Screen Copy Key Panel Name Contrast/ Remaining Film Indicator Contrast 2-Screen Copy Key Multi-Copy/ Error Indicator Multi-Copy/ Stop Key Copy Key Advance Advance Key Copy Key Description This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the printing contrast used during copying.
Installing the Thermal Transfer Film Installing the Thermal Transfer Film Install the thermal transfer film in the printer. Set the power switch to on ( I ). • “ ” will flash on the Multi-Copy/Error Indicator when the thermal transfer film has run out.
• Thermal paper • Paper that is printed on one side • Wrinkled paper, creased paper, etc. Set the power switch to on ( I ). • “ ” will flash on the Multi-Copy/Error Indicator when copy paper has run out.
Page 12
Loading Copy Paper Pull the paper cover forward as shown in the figure. To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go. Guide Maximum paper limit Note...
Making Copies This section describes how to copy text and illustrations drawn on the screen. Set the power switch to on ( I ). • “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy.
Notes on Replacing Thermal Transfer Film • Only use the designated product (UG-6001) from Panasonic as the replacement film. (Note that using another type of replacement film may result in degraded printing quality or damage to the unit.) • Thermal transfer film is disposable. Dispose of used thermal transfer film as “burnable”...
Paper Jams Remove paper jams by the following procedure when copy paper does not come out of the output port or when “ ” flashes on the Multi-Copy/Error Indicator. Push down the printer open lever to open the printer door. Remove the thermal transfer film with both hands.
Page 16
Paper Jams To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go. Guide Maximum paper limit Note •...
Board Image Capture” on page 18. • If you connect the electronic board to a USB hub, it is not guaranteed to work. • Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.
Computer Interfacing ■ Installing Drivers / Board Image Capture The USB, printer, TWAIN driver and Board Image Capture are installed in your computer by following procedures. Note • Do not yet connect a USB cable to the electronic board. Power on your computer and start Windows* •...
For Windows 2000 / Windows XP / Windows Vista: Quick Image Navigator For Windows 98 / Windows Me: Panasonic-DMS If Panasonic-DMS is already installed, you do not need to uninstall it. Power on your computer and start Windows. • Log on as an administrator for Windows 2000, Windows XP or Windows Vista.
Panasonic Quick Image Navigator. Follows the instructions on the screen. After uninstalling, restart your computer. ■ Removing Panasonic-DMS If you need to remove Panasonic-DMS, perform the following steps. Power on your computer and start Windows. Click [Start], move the pointer to Programs–...
For Quick Image Navigator: From the File menu, click Environment Setup..., click TWAIN tab, then click Select TWAIN- compliant scanning device... For Panasonic-DMS: Click the File menu, then click Select source... Select Panaboard UB5-7 USB TWAIN Driver and click [Select].
Computer Interfacing ■ Panaboard Operation Panel It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key and 2-Screen Copy Key on the electronic board control panel are used for scanning images into the computer.
Panel Name 2-Screen Copy Button Copy Button Status Box About Button Help Button Close Button ■ Printing To print documents from the computer to the printer, select the Print menu of the application software and select the printer name set when installing. The standard printer name is “Panaboard-UB5 USB Printer (A4/Letter)*”.
Daily Care and Maintenance Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit. ■ Cleaning the screen and the unit Gently wipe the screen film and unit with a water- dampened cloth that has been thoroughly wrung.
Page 25
Clean the Printer Head Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head. Cotton swab Printer head (Gold) Note • Never touch the printer head or the surrounding area with your hands as this may disable copying.
After the existing Panasonic-DMS software is uninstalled, the new Panasonic-DMS is installed. Install the new Panasonic-DMS again as follows. 1. Uninstall the current Panasonic-DMS. 2. Install the old Panasonic-DMS. 3. Install the new Panasonic-DMS in the same folder with the old one. Page – ”.) ”.) –...
Symptom The old Panasonic-DMS is not uninstalled if the old version of the Panasonic Document Panasonic-DMS has been installed before installing the new one. Management System menu is remained in the Programs menu even if Panasonic-DMS is uninstalled. The USB driver or printer The Panaboard has not been registered in [Control Panel]–[Scanners...
Marker and eraser set: KX-B035 (contains one black, one red, and one blue markers and Letter size is for U.S.A. and Canada models. UB-5325 Refer to the name plate on the printer Refer to the name plate on the printer 1396 mm ×...