Panasonic Panaboard KX-BP800U Operating Instructions Manual page 85

4
Attach the power cord.
1. Securely fit the supplied power
cord into the AC inlet on the
printer unit.
AC inlet
2. Fit the power cord into the cord
holder. Do not force it.
5
Power cord
Cord holder
6
Assembling the Print Board
Wipe the screen film surface.
Wipe the screen film gently with a
water-dampened cloth that has been
thoroughly wrung.
Notes
• Do not use thinner, benzine or cleaners
containing abrasives as this may result
in discoloration.
• Do not wipe the screen film with a dry
cloth as this may generate a static
charge.
Check operations.
Refer to page 86 "Print Board
Operations Check".
85