Wall-Mounting Procedure - Panasonic Panaboard KX-BP800U Operating Instructions Manual

Wall-mounting Kit

Wall-mounting procedure

1
Confirm that the wall is strong enough to support the weight of the print board.
(Please refer to page 91.)
2
Tape the wall-mounting template to the wall.
• Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with
the electronic print board (KX-BP800 series).
• When taping the template to the wall, make sure it is level.
3
1. Drill holes in the wall for the wall-mounting fixtures. (8 holes total)
2. After removing the wall-mounting template, attach the wall-mounting fixtures with the
appropriate wall-mounting hardware (two screws in each fixture).
This hardware must be locally procured, it is not included in the kit.
• Refer to the section "Attaching the wall-mounting fixtures" (pages 93 and 94) for drilling in the wall and
attaching the mounting fixtures.
Mount the print board. (Please refer to page 84.)
92
(KX-B063)
Caution:
The wall must be capable of supporting at least
1,005 N [103 kgf] for KX-BP800 series.
Wall-mounting
fixture L
Wall-
mounting
hardware*
Wall-mounting
fixture L
Wall-
mounting
hardware*
Wall-mounting template
(provided with KX-BP800 series)
L
Wall-mounting
fixture R
L
R
R