Panasonic Panaboard KX-BP800U Operating Instructions Manual page 94

Wall-mounting Kit
• Attaching to plasterboard walls
Split-wing toggles (sold in stores) are needed.
• Attaching to wooden walls
Use wood screws (sold in stores).
94
(KX-B063)
Plasterboard
split-wing toggle
Wall-mounting
fixture
Bolt
Arms
Arms
Wall-mounting fixture
Wood screw
Wooden wall
Insert each bolt through a
hole in the wall-mounting
fixture and into the hole in
the wall beneath so that
the arms of the split-wing
toggle are horizontal. For
the correct hole size, refer
to the instructions for the
particular split-wing
toggles used.
After the arms expand, pull
the wall-mounting fixture
out until the arms of the
split-wing toggle grip
firmly into the wall.
Tighten each bolt until the
wall-mounting fixture is
securely fixed to the wall.
For the correct hole size,
refer to the instructions for
the particular wood
screws used.