Panasonic Panaboard KX-BP800U Operating Instructions Manual page 22

Paper Jams
5
Install the film cassette.
• Insert the film cassette into the printer so
that the blue gear on the cassette aligns with
the blue label on the printer and then insert
the gear shafts on both sides of the cassette
into the grooves inside the printer.
6
Close the printer door.
• Securely close the printer door with both
hands until a click is heard.
• The " " flashing on the multi-copy / error
indicator will go out.
• If the flashing " " does not go out after the foregoing procedure has been performed;
This may indicate that the paper feeder is not functioning properly.
Reload the copy paper by following the steps given below.
1
Turn the power off and on.
2
Open the paper cover and remove all copy
paper remaining inside the unit's paper
cover.
• Note that the copy paper will slightly resist
being removed, but may be pulled out
without problems.
22
Blue Label
Grooves
Paper Cover
Grooves
Printer Door