Epson Stylus Photo 700 User Manual page 55

1. Make sure the printer is connected to your Macintosh and is
turned on.
2. Choose Chooser from the Apple menu. Then click the icon
corresponding to your printer and the port your printer is
connected to. If you don't see the appropriate icon, use the
arrows on the right to scroll through the available icons.
Note:
G
If you are using AppleTalk on the printer port, select the
modem port or leave AppleTalk inactive.
G
If you are using AppleTalk on the modem port, select the
printer port or leave AppleTalk inactive.
G
If you are using your Macintosh in an Ethernet environment,
you can connect your printer to either the printer port or
modem port and leave AppleTalk active.
c
2-30
Getting Started
Caution:
Do not make AppleTalk inactive if the Macintosh is
connected to an AppleTalk network. However, if your
Macintosh has a 68030 microprocessor CPU, make
AppleTalk inactive whenever you print with the EPSON
STYLUS PHOTO 700.