Epson Stylus Photo 700 User Manual page 41

4. If you defined a password, enter it at the prompt. You see the
New Hardware Found screen.
If this screen does not appear, click Cancel and follow the
installation procedure on page 2-13 instead.
5. Make sure your printer model name is displayed on the
screen. Then click the Driver from disk provided by
hardware manufacturer button. Do not select any of the
other buttons.
6. Click OK. You see the Install From Disk screen.
7. Insert the printer software CD shipped with your printer in
the CD-ROM drive. Depending on the country, the
CD-ROM may contain a multiple-language version of the
printer software.
First try typing D:\Win95 and clicking OK. If an error
message does not appear, proceed to step 8. If an error
message appears, click OK to return to the Install From
Disk screen. Type D:\ then specify your preferred language
by typing English, Francais, German, Italian, Portugal, or
Spanish, followed by \Win95. Click OK.
(If your CD-ROM drive uses a drive letter other than "D",
substitute the appropriate letter.)
2-16
Getting Started