Epson Stylus Photo 700 User Manual page 156

Something on the page is wrong or missing.
Cause
The printer settings within
your application are
incorrect.
The interface cable is not
connected properly.
An unknown problem has
occurred.
The print head moved to the ink cartridge replacement
position unexpectedly.
Cause
R
The cleaning button was
pressed while the B or A
light was flashing or on.
The New Hardware Found screen appears even though the
printer software has already been installed.
Cause
This error may occur when
using Windows 95.
What to do
Adjust the printer settings within your
application and print again.
If your Macintosh has only one serial
port, choose Chooser from the Apple
menu and select the
Check that the cable is securely
connected to the printer and the
computer.
If your Macintosh has a built-in
modem, connect the interface cable to
the Macintosh's printer port.
Disconnect the interface cable from the
computer; then try the printer
operation check described on page 8-4.
What to do
One or both of the ink cartridges is
low or out of ink. Replace the ink
cartridges as described on page 7-2.
What to do
Click the Do not install a driver
(Windows will not prompt you
again) button; then click OK.
Troubleshooting
modem port.
8-13
8