Epson Stylus Photo 700 User Manual page 20

Buttons
Button
P
power
E
load/eject
R
cleaning
Lights
The lights on the front of the printer indicate the printer status,
such as receiving data, paper jam, or low on ink. The following
table describes what the lights mean.
P B A
S
- -
N
- -
F
- -
N
-
F O O
- -
F
- -
N
- - -
F
- - -
N
N = on, O = off, F = flashing, - = irrelevant
Function
Turns the printer on and off.
Loads or ejects paper if pressed and released within
two seconds. Resumes printing if pressed after a
paper out error.
Moves the print head to the replacement position if
pressed for about three seconds while the B or A ink
out light is flashing or on. Returns the print head to its
home position after ink cartridge replacement.
Performs print head cleaning if pressed for about three
seconds when both the B and A ink out lights are off.
Printer Status
Printer is on.
-
Receiving data, replacing an ink cartridge,
-
charging ink, or cleaning the print head.
Paper out. Load paper in the sheet feeder; then
-
E
press the load/eject button to resume printing.
Paper jam. Take all the paper out of the sheet
feeder, reload the paper, then press the
load/eject button. If the light continues to flash, turn
off the printer and gently pull out any paper that
may be jammed in the printer.
Ink low. The black ink cartridge is nearly empty.
-
Obtain a black ink cartridge (S020093).
Ink out. The black ink cartridge is empty. Replace
-
the black ink cartridge (S020093).
Ink low. The color ink cartridge is nearly empty.
Obtain a color ink cartridge (S020110).
Ink out. The color ink cartridge is empty. Replace
the color ink cartridge (S020110).
Getting to Know Your Printer
1
E
1-3