Removing The Cpu (For K2St) - NEC VERSA M350 Disassembly Manual

Note: Beware of screws use on the CPU heat sink! Make sure to use the screw size M2.5x7, otherwise it
might cause damage to the CPU die. Secure the screw around the CPU socket first before other screws.
5. Use Flat screwdriver to unlock the CPU from the CPU socket and lift up the CPU carefully.

Removing the CPU (For K2ST)

To remove the CPU first remove the battery (see
Keyboard (see Removing the
1. Remove the screws retaining the Heat Plate as shown in Fig. 17
Fig. 16 Unlocking the CPU
Keyboard) then perform the following steps:
Fig. 17 Removing the screws retaining Heat Plate
NEC VERSA M350/P550 Disassembly Manual
Removing the Battery) and remove the
M2.5 x 7 Sliver
Page 14