Removing The Cpu (For K2S) - NEC VERSA M350 Disassembly Manual

Removing the CPU (For K2S)

To remove the CPU first remove the battery (see
Keyboard (see Removing the
3. Remove the screws retaining the Heat Plate as shown in Fig. 14
4. Disconnect Fan connection and remove the CPU Heat sink screws around CPU socket in
descending order (6 5 4 3 2 1), then lift up the CPU heat sink and CPU Fan
separately.
Keyboard) then perform the following steps:
Fig. 14 Removing the screws retaining Heat Plate
Fig. 15 CPU Heat Sink
NEC VERSA M350/P550 Disassembly Manual
Removing the Battery) and remove the
M2.5 x 7 Sliver
M2.5 x 6 Sliver
Page 13