Removing The Wireless Lan Module - NEC VERSA M350 Disassembly Manual

Removing the Wireless LAN Module

To remove the Wireless LAN Module first remove the battery (see
remove the Keyboard (see
1. Remove the screws retaining the Heat Plate as shown in Fig. 12 and lift it up carefully
2. Disconnect wireless antenna connection and then release it from mini PCI slot as shown in
Fig. 13
Removing the Keyboard) then perform the following steps:
Fig. 12 Removing the screws retaining the Heat Plate
Fig. 13 Releasing Wireless LAN module
NEC VERSA M350/P550 Disassembly Manual
Removing the Battery) and
M2.5 x 7 Sliver
Page 12