4. Release the inverter board by remove the screw and disconnect all connectors as shown
in Fig. 29
5. Carefully lift up the LCD panel.
6. Remove the screws at both sides of the LCD panel in order to release the LCD hinges as
shown in Fig. 30
Note: Beware when assembly LCD Bezel. You need to follow below instruction to ensure it properly
close at both left and right side of the Bezel.
1. Push on top of Bezel.
2. Push at the side of LCD cover inward to close the gap
NEC VERSA M350/P550 Disassembly Manual
Fig. 29 Removing the Inverter Board
Fig. 30 Removing the LCD Panel hinges
M2x3 Copper
M2x3 Copper
Page 20