Removing The Dc/Dc Board - NEC VERSA P600 Disassembly Manual

Removing the DC/DC Board

To remove the DC/DC board, first remove the Top Cover (see
perform the following steps:
1. Remove the screw on the DC/DC board as shown in Fig. 31
2. Carefully remove the DC/DC board as shown in Fig. 32 and put it aside.
Fig. 31 DC/DC Board
Fig. 32 Removing the DC/DC Board
NEC Versa P600 Disassembly Manual
Removing the Top Cover), then
M2.5x11 Black
Page 20