Igmp Static Multicast Router Configuration - Nortel Alteon OS 40M2420 Command Reference Manual

Alteon OS Command Reference
Table 6-88 IGMP Relay Mrouter Menu Options (/cfg/l3/igmp/relay/mrtr)
Command Syntax and Usage
ena
Enables the multicast router.
dis
Disables the multicast router.
del
Deletes the multicast router from IGMP Relay.
cur
Displays the current IGMP Relay multicast router parameters.
/cfg/l3/igmp/mrouter

IGMP Static Multicast Router Configuration

[Static Multicast Router Menu]
Table 6-89
N – When you configure a static multicast router on a VLAN, the process of learning mul-
OTE
ticast routers is disabled for that VLAN.
Table 6-89 IGMP Static Multicast Router Menu Options (/cfg/l3/igmp/mrouter)
Command Syntax and Usage
add <port number> <VLAN number> <IGMP version number>
Selects a port/VLAN combination on which the static multicast router is connected, and configures
the IGMP version (1, 2, or 3) of the multicast router.
remove <port number> <VLAN number> <IGMP version number>
Removes a static multicast router from the selected port/VLAN combination.
cur
Displays the current IGMP Static Multicast Router parameters.
290 Chapter 6: The Configuration Menu
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
describes the commands used to configure a static multicast router.
40M2420, April 2007