Ip Static Route Configuration - Nortel Alteon OS 40M2420 Command Reference Manual

Alteon OS Command Reference
Table 6-60 Default Gateway Menu Options (/cfg/l3/gw)
Command Syntax and Usage
vlan <1-4095>
Sets the VLAN to be assigned to this default IP gateway.
ena
Enables the gateway for use.
dis
Disables the gateway.
del
Deletes the gateway from the configuration.
cur
Displays the current gateway settings.
/cfg/l3/route

IP Static Route Configuration

[IP Static Route Menu]
Up to 128 static routes can be configured.
Table 6-61 IP Static Route Configuration Menu Options (cfg/l3/route)
Command Syntax and Usage
add <destination> <mask> <gateway> <interface number>
Adds a static route. You will be prompted to enter a destination IP address, destination subnet
mask, and gateway address. Enter all addresses using dotted decimal notation.
rem <destination> <mask>
Removes a static route. The destination address of the route to remove must be specified using dot-
ted decimal notation.
cur
Displays the current IP static routes.
256 Chapter 6: The Configuration Menu
add - Add static route
rem - Remove static route
cur - Display current static routes
40M2420, April 2007